-
The 170 Blank is a 13.5” X 13.5” blank wall plate used to cover the hole left by a 170 In-Wall Amplifier when it is removed from a building. The wall plate has corner mounting holes, and is covered with an off-white epoxy-based paint. The 170 Blank can also be used as a mounting base for custom electronics. -
The FR700 is a 6.5” X 3.75” piece of Lexan plastic used to cover the holes left around the edges when installing a new microphone in the Primary Room. The backside has a peel off adhesive surface that holds the cover in place. -
The Help Desk Panel is a 1RU 19” rack mounted aluminum panel for displaying the Help Desk phone number and property id of the installation. -
The ISOX is a 1:1 600-ohm transformer designed to reduce hum and noise on an audio input. It provides the necessary isolation for a clean signal. The connection on both sides of the ISOX are 3-pin screw down terminals. The back side of the ISOX is covered with Velcro fasteners, so it can be easily mounted wherever it is convenient. Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 2.5” X 1.3” X .6” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 oz. Frequency Response . . . . . . . . . . . . . . . . . 200Hz to 20kHz Distortion (0dB/at1.0kHz) . . . . . . . . . . . . . . . . . . . . . . .005% -
The PMC is a 24-volt DC remote controlled relay which can switch signal or power up to 10 amps. It is designed to control the motor of a pulpit or lectern. Installation is easy. A screw terminal connector is used for the control side, and a 6-pin Molex connector is used on the switching side. The mating Molex connector and installation pins are provided with the PMC. The two heavy duty UL listed Potter & Brumfield relays are both socketed for ease in servicing. -
The RC10L-10 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for nine channels with a master volume control. The RC10L-10 has a 10’ cable terminated into a 13-pin male DIN connector. The mating 13-pin female DIN connector is provided mounted on a single gang stainless steel wall plate with a euro-style terminal block on the backside for wiring connections. -
The RC10L-5 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for four channels with a master volume control. The RC10L-5 has a 10’ cable terminated into an 8-pin male DIN connector. The mating 8-pin female DIN connector is provided mounted on a single gang stainless steel wall plate. The RC10L-5 can also be plugged into an MSC-R module. -
The SPC5X12 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The SPC5X7 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum.
