-
The VDA-6 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to six amplified outputs. Each output is a 1-volt composite video signal. The VDA-6B has standard BNC connectors on its’ inputs and outputs, while the VDA-6F has standard “F” style connectors on its’ inputs and outputs. The VDA-6 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-6 can continue to supply a good picture on each output down to 65VAC. Each VDA-6 comes with a UL/CSA approved wall power supply. The VDA-6 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-6 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to six amplified outputs. Each output is a 1-volt composite video signal. The VDA-6B has standard BNC connectors on its’ inputs and outputs, while the VDA-6F has standard “F” style connectors on its’ inputs and outputs. The VDA-6 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-6 can continue to supply a good picture on each output down to 65VAC. Each VDA-6 comes with a UL/CSA approved wall power supply. The VDA-6 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The SPC5X7 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The SPC5X12 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The SMG105 Sound Masking Generator is the perfect solution for masking needs in offices or facilities where voice privacy enhancement is desired. The SMG105 generates a soft pink noise that acoustically sounds very much like air-handling ducts or vents. It can provide voice privacy at an affordable cost. The SMG105 card is a standalone device and comes with its’ own UL approved power supply. This makes your installation for sound masking simple since it can be placed wherever it is convenient. The pseudo-random sequence that feeds the pink noise low-pass filter on the SMG105, exceeds 1.5 days in length before the sequence is repeated. This provides a reliable high security solution for your voice masking. -
The SMG100 Sound Masking Generator card is the perfect solution for masking needs in offices or facilities where voice privacy enhancement is desired. The SMG100 generates a soft pink noise that acoustically sounds very much like air-handling ducts or vents. It can provide voice privacy at an affordable cost. The SMG100 card has been designed to be compatible with the TOA® 900 series amplifiers, or other amplifiers that accept the 900 series configuration cards. This makes your installation for sound masking simple since it plugs right into one of the card slots on the back of the 900 series amplifiers. The pseudo-random sequence that feeds the pink noise low-pass filter on the SMG100 card, exceeds 1.5 days in length before the sequence is repeated. This provides a reliable high security solution for your voice masking. -
The RC10L-5 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for four channels with a master volume control. The RC10L-5 has a 10’ cable terminated into an 8-pin male DIN connector. The mating 8-pin female DIN connector is provided mounted on a single gang stainless steel wall plate. The RC10L-5 can also be plugged into an MSC-R module. -
The RC10L-10 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for nine channels with a master volume control. The RC10L-10 has a 10’ cable terminated into a 13-pin male DIN connector. The mating 13-pin female DIN connector is provided mounted on a single gang stainless steel wall plate with a euro-style terminal block on the backside for wiring connections. -
The QIF pairs with a Q-SYS core 110 series DSP. It facilitates installs by transforming 3 TTL logic outputs to 24V outputs, increases current from 200mA total to 200mA each, and converts a low voltage TTL voltage output to contact closure output. It provides simple connections which can be used for 24V podium lifts, auxiliary power controls, IR signals, or other controls for automating the sound system. It comes with 36” long pre-wired control cables and a 24V power supply. Specifications: Dimensions (L x W x H) . . . 4.5” x 4.125” x 1.5” Weight . . . 6 oz. Warranty: Emtech Electronics, Inc. warrants the QIF Interface for a period of one year, from original date of purchase, against defects in parts and workmanship. If a defect occurs, the unit will be repaired or replaced, at our option, free of all charges if delivered prepaid to the factory. Warranty does not extend to finish, appearance, abuse or defects due to the misuse or operation under other than specified conditions, nor does it extend to incidental or consequential damages. Repair by anyone other than Emtech will void the warranty. -
The PMC is a 24-volt DC remote controlled relay which can switch signal or power up to 10 amps. It is designed to control the motor of a pulpit or lectern. Installation is easy. A screw terminal connector is used for the control side, and a 6-pin Molex connector is used on the switching side. The mating Molex connector and installation pins are provided with the PMC. The two heavy duty UL listed Potter & Brumfield relays are both socketed for ease in servicing. -
The Output Contact Closure (OCC) is designed to provide additional contact closures for Up/Down controls, relays, and DC Voltage Switches. It features two controllable digital switches, a 200mA poly-fuse on each switch output pair, reset logic favoring output one, and integrated fly-back diodes for relay control, all in a small, protected package. Size: 1.4” L X 1.1” W X 1.0” H Weight: < 1 oz. -
-
The MSV-V has a female HD-15 for handling the input or output of VGA signals. The MSV-V mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). The VGA connector is a bulkhead female to female. Modules are available in Brown, Ivory or White. -
The MSV-TVI is a single-gang decora style metal plate with an HDMI M-M Pigtail connection and a USB-A M-M Pigtail connection. The MSV-TVI provides a rugged, yet good looking, panel for handling the audio/video and computer inputs in a room. The module mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). Modules are available in Brown, Ivory or White. -
The MSV-P has a single gold-plated HD-15 connection for handling digital video signals from a projector. The MSV-P mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). The HD-15 connector is bulkhead female to female. Modules are available in Brown, Ivory or White. -
The MSV-H has a single gold-plated HDMI connection for handling digital audio and video signals. The MSV-H mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). The HDMI connector is bulkhead female to female. Modules are available in Brown, Ivory or White. -
The MSV-F has a single gold-plated F81 jack for handling the input or output of RF television signals. The MSV-F mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). The F81 is an “F” style connection on both sides of the panel. Modules are available in Brown, Ivory or White. -
The MSV-AV has three gold-plated RCA jacks, red and white for audio and yellow for video, for handling composite A/V signals for either input or output. The MSV-AV mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). Connectors are bulkhead female to female. Modules are available in Brown, Ivory or White. -
The MSV-A has two gold-plated RCA jacks, red and white, for handling composite audio signals for either audio in or audio out. The MSV-A mounts into a standard single-gang electrical box (not provided) and is finished off using a matching decora cover plate (see HPS-1). Connectors are bulkhead female to female. Modules are available in Brown, Ivory or White. -
The MSC-WO provides a passive, transformer isolated mono balanced output to stereo RCA jacks in a Decora style panel. A user adjustable attenuation control is provided as well. The MSC-WO is an easy way to provide a fixed location output connection point for recording audio from a sound system. Connection on the sound system side of the balanced line interface is made using screw terminals. Panels are available in Ivory, White and Brown. -
The MSC-W3R provides passive, transformer isolated RCA jacks and a stereo 3.5mm jack for an unbalanced stereo line to mono balanced 600-ohm line interface in a Decora style panel. A user adjustable attenuation control is provided as well. The MSC-W3R is an easy way to provide a fixed location connection point for a DVD, VCR, CD or tape player. Connection on the sound system side of the balanced line interface is made using screw terminals. Panels are available in brown, ivory, or white. -
The MSC-W3 provides a passive, transformer isolated stereo 3.5mm jack for an unbalanced stereo line to mono balanced 600-ohm line interface in a Decora style panel. A user adjustable attenuation control is provided as well. The MSC-W3 is an easy way to provide a fixed location connection point for a DVD, VCR, CD or tape player. Connection on the sound system side of the balanced line interface is made using screw terminals. Panels are available in brown, ivory, or white.
