-
The AVDH-2 provides permanent connections to the audio/video distribution systems of a meetinghouse for receiving webcasts and satellite feeds only. It has no transmission capabilities. Installed in LDS Ward Buildings it can receive transmissions of Stake Conferences or High Council meetings. Professional installation in the A/V rack and certification of the installation are recommended. AVDH-2 SPECIFICATIONS The AVDH-2 contains a: 1 X 4 Video Distribution Amplifier (Chapel & Satellite) Input impedance . . . . . . . . . . . . . . . . . . . 75ohm + 1% Output impedance . . . . . . . . . . . . . . . . . . 75ohm + 1% Maximum output . . .1-volt P-P (w/75ohm termination) Frequency response . . . . . . . . . . . . . . . . DC to 30MHz Temperature range . . . . . . . . . . . . . -40 to 85 degrees C Rear Panel Connections = 75ohm BNC (both inputs and outputs) 1 X 4 Audio Distribution Amplifier (Chapel & Satellite) Input impedance . . . . . . . . . . . . . . . . . . . . . . . 8K ohms Output impedance . . . . . . . . . . . . . . . . . . . . . . 150 ohm Output adjustment . . . . . . . . . . . . . . . . -68dB to -4.2 dB Frequency response . . . . . . . . . . . . . . . . . . 20 to 20KHz THD+N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02 % Temperature range . . . . . . . . . . . . . . -40 to 85 degrees C Rear Panel Connections = 3 Pin Phoenix terminals (Note: Audio input is adjustable for achieving balance between chapel and satellite input signals & one audio output is adjustable.) VGA to Composite Video Converter (VGA In – front panel/VGA Out – rear panel) Supports VGA resolutions: 640X480 @ 60/72/75/85Hz, 800X600 @ 60/75Hz, and 1024X768 @ 60/75Hz Simultaneous output of VGA and Composite Video Synchronous display of picture on both computer monitor and TV Supports NTSC/PAL Front Panel Connection = HD15 Female Rear Panel Connection = HD15 Female Note: VGA OUT signal strength provides transmission distance of 200 feet when using Hi-Res VGA cable. -
The AVDH-1 provides permanent connections to the audio/video distribution systems of a meetinghouse for transmitting and receiving webcasts and receiving satellite feeds. Installed in LDS Stake Centers it can also transmit Stake Conferences or High Council meetings to outlying ward buildings. Professional installation in the A/V rack and certification of the installation are recommended. AVDH-1 SPECIFICATIONS The AVDH-1 contains a: 2 X 8 Video Distribution Amplifier (Chapel & Satellite) Input impedance . . . . . . . . . . . . . . . . . . . 75ohm + 1% Output impedance . . . . . . . . . . . . . . . . . . 75ohm + 1% Maximum output . . .1-volt P-P (w/75 ohm termination) Frequency response . . . . . . . . . . . . . . . . DC to 30MHz Temperature range . . . . . . . . . . . . . -40 to 85 degrees C Rear Panel Connections = 75ohm BNC (both inputs and outputs) 2 X 6 Audio Distribution Amplifier (Chapel & Satellite) Input impedance . . . . . . . . . . . . . . . . . . . . . . . 8K ohms Output impedance . . . . . . . . . . . . . . . . . . . . . . 150 ohm Output adjustment . . . . . . . . . . . . . . . . -68dB to -4.2 dB Frequency response . . . . . . . . . . . . . . . . . . 20 to 20KHz THD+N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02 % Temperature range . . . . . . . . . . . . . . -40 to 85 degrees C Rear Panel Connections = 3 Pin Phoenix terminals (Note: Both audio inputs are adjustable for achieving balance between chapel and satellite input signals & one audio output is adjustable.) High Speed Serial USB to Cat6 RJ45 Converter (Camera Control) Supports 230 Kbps – twice the speed of a built-in serial port Front Panel Connection = USB B Type Rear Panel Connection = RJ-45 Cat6 Jack VGA to Composite Video Converter (VGA In – front panel/VGA Out – rear panel) Supports VGA resolutions: 640X480 @ 60/72/75/85Hz, 800X600 @ 60/75Hz, and 1024X768 @ 60/75Hz Simultaneous output of VGA and Composite Video Synchronous display of picture on both computer monitor and TV Supports NTSC/PAL Front Panel Connection = HD15 Female Rear Panel Connection = HD15 Female Note: VGA OUT signal strength provides transmission distance of 200 feet when using Hi-Res VGA cable. -
The 170 Blank is a 13.5” X 13.5” blank wall plate used to cover the hole left by a 170 In-Wall Amplifier when it is removed from a building. The wall plate has corner mounting holes, and is covered with an off-white epoxy-based paint. The 170 Blank can also be used as a mounting base for custom electronics. -
The VISCA Camera Cable converts the 8-Pin Mini-DIN VISCA connection on a video camera to an RJ-45 Cat 6 connection for sending the video signal back to the A/V rack. The cable is three feet in length. -
The 16-234 is a six-foot cable featuring a ¼” stereo male connection to a 1/4:” stereo male connection. Standard cable on the EJ-8 and EJ-10. -
The 16-223 is a five-foot cable featuring a dual RCA male connection to a dual 3.5mm male connection. Standard cable on the EJ-8 and EJ-10. -
The 16-135 is a five-foot cable featuring a dual RCA male connection to a 3.5mm stereo male connection. Standard cable on the EJ-2, EJ-2Plus, EJ-8 and EJ-10. -
The 16-131 is a three-foot cable featuring a ¼” stereo male connection to 3.5mm stereo male connection. Standard cable on the EJ-8 and EJ-10. Color of cable may vary. -
The 16-095 is a three-foot cable featuring a 3.5mm stereo male connection to 3.5mm stereo male connection. -
The 16-066 is a six-foot cable featuring a 3.5mm male connection to 3.5mm male connection. Can be used with the MSC-U module. -
The 16-020 is a three-foot cable featuring a dual RCA male connection to dual RCA male connection. Standard cable provided with the EJ-2 and EJ-2 Plus. -
The 16-014 is a three-foot cable featuring a 2.5mm stereo male connection to a 3.5mm stereo male connection.
