-
The PMC is a 24-volt DC remote controlled relay which can switch signal or power up to 10 amps. It is designed to control the motor of a pulpit or lectern. Installation is easy. A screw terminal connector is used for the control side, and a 6-pin Molex connector is used on the switching side. The mating Molex connector and installation pins are provided with the PMC. The two heavy duty UL listed Potter & Brumfield relays are both socketed for ease in servicing. -
The QIF pairs with a Q-SYS core 110 series DSP. It facilitates installs by transforming 3 TTL logic outputs to 24V outputs, increases current from 200mA total to 200mA each, and converts a low voltage TTL voltage output to contact closure output. It provides simple connections which can be used for 24V podium lifts, auxiliary power controls, IR signals, or other controls for automating the sound system. It comes with 36” long pre-wired control cables and a 24V power supply. Specifications: Dimensions (L x W x H) . . . 4.5” x 4.125” x 1.5” Weight . . . 6 oz. Warranty: Emtech Electronics, Inc. warrants the QIF Interface for a period of one year, from original date of purchase, against defects in parts and workmanship. If a defect occurs, the unit will be repaired or replaced, at our option, free of all charges if delivered prepaid to the factory. Warranty does not extend to finish, appearance, abuse or defects due to the misuse or operation under other than specified conditions, nor does it extend to incidental or consequential damages. Repair by anyone other than Emtech will void the warranty. -
The RC10L-10 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for nine channels with a master volume control. The RC10L-10 has a 10’ cable terminated into a 13-pin male DIN connector. The mating 13-pin female DIN connector is provided mounted on a single gang stainless steel wall plate with a euro-style terminal block on the backside for wiring connections. -
The RC10L-5 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for four channels with a master volume control. The RC10L-5 has a 10’ cable terminated into an 8-pin male DIN connector. The mating 8-pin female DIN connector is provided mounted on a single gang stainless steel wall plate. The RC10L-5 can also be plugged into an MSC-R module. -
The SMG100 Sound Masking Generator card is the perfect solution for masking needs in offices or facilities where voice privacy enhancement is desired. The SMG100 generates a soft pink noise that acoustically sounds very much like air-handling ducts or vents. It can provide voice privacy at an affordable cost. The SMG100 card has been designed to be compatible with the TOA® 900 series amplifiers, or other amplifiers that accept the 900 series configuration cards. This makes your installation for sound masking simple since it plugs right into one of the card slots on the back of the 900 series amplifiers. The pseudo-random sequence that feeds the pink noise low-pass filter on the SMG100 card, exceeds 1.5 days in length before the sequence is repeated. This provides a reliable high security solution for your voice masking. -
The SMG105 Sound Masking Generator is the perfect solution for masking needs in offices or facilities where voice privacy enhancement is desired. The SMG105 generates a soft pink noise that acoustically sounds very much like air-handling ducts or vents. It can provide voice privacy at an affordable cost. The SMG105 card is a standalone device and comes with its’ own UL approved power supply. This makes your installation for sound masking simple since it can be placed wherever it is convenient. The pseudo-random sequence that feeds the pink noise low-pass filter on the SMG105, exceeds 1.5 days in length before the sequence is repeated. This provides a reliable high security solution for your voice masking. -
The SPC5X12 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The SPC5X7 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-6 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to six amplified outputs. Each output is a 1-volt composite video signal. The VDA-6B has standard BNC connectors on its’ inputs and outputs, while the VDA-6F has standard “F” style connectors on its’ inputs and outputs. The VDA-6 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-6 can continue to supply a good picture on each output down to 65VAC. Each VDA-6 comes with a UL/CSA approved wall power supply. The VDA-6 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-6 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to six amplified outputs. Each output is a 1-volt composite video signal. The VDA-6B has standard BNC connectors on its’ inputs and outputs, while the VDA-6F has standard “F” style connectors on its’ inputs and outputs. The VDA-6 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-6 can continue to supply a good picture on each output down to 65VAC. Each VDA-6 comes with a UL/CSA approved wall power supply. The VDA-6 does not require you to sacrifice rack space, it can be mounted where it is most convenient.
