-
The BLU-CC2 is a 3-gang in-wall remote control designed to work with the BSS Audio and QSC Digital Signal Processors (DSP) for providing sound system controls for the cultural center of LDS chapels. It provides controls for turning on and off the sound, establishing manual control for the cultural center sound system, setting the volume levels of the microphones in the cultural center, and providing an Aux input for the cultural center. The connections on the backside of the BLU-CC consist of two RJ-45 connectors, and a 3-pin euro-style connector for the Mic 3 / Aux input. Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6” X 7.5” X 3” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 lbs -
The BLU-CIF Interface Board provides a simple wiring interface for the BLU-CC2, BLU-CP, BLU-CS, and BLU-IR modules to the BSS Audio Digital Signal Processors for LDS chapel installations. It provides LED status indicators, the appropriate connections for each of the controls, and relays for triggering the turn on of external equipment and switching of speaker level signals for audio in overflow areas. The BLU-CIF is used for single chapel configurations. The connections on the BLU-CIF consists of 3.5mm euro style blocks for existing wiring, and RJ-45 connectors for Cat5e or Cat6 wiring. It also ships with two prefabricated cables for connecting it to the DSP. The board is powered by an external 24VDC tabletop power supply (included with each unit). Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0” X 10.0” X 2.0” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 lbs. Shipping Weight ( w/cables & pwr. supply) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 lbs. Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC @ 1.67A Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC / 400mW / Non-Latching -
The BLU-CIF2 Interface Board provides a simple wiring interface for the BLU-CC2, BLU-CP, BLU-CS, and BLU-IR modules to the BSS Audio Digital Signal Processors for LDS chapel installations. It provides LED status indicators, the appropriate connections for each of the controls, and relays for triggering the turn on of external equipment and switching of speaker level signals for audio in overflow areas. The BLU-CIF2 is used for dual chapel or Heritage 09T configurations. The connections on the BLU-CIF consists of 3.5mm euro style blocks for existing wiring, and RJ-45 connectors for Cat5e or Cat6 wiring. It also ships with four prefabricated cables for connecting it to two DSPs. The board is powered by an external 24VDC tabletop power supply (included with each unit). Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0” X 10.0” X 2.0” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 lbs. Shipping Weight ( w/cables & pwr. supply) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6 lbs. Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC @ 1.67A Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VDC / 400mW / Non-Latching -
The BLU-CP is a pulpit control designed to work with the BSS London Series of Digital Signal Processors for LDS Chapel installations. It provides controls for turning on and off, and setting the volume level of the sound system, as well as adjusting the height of the pulpit in the chapel. Connections on the backside of the pulpit control consist of a 3-pin Euro style connector for the pulpit motor, and an RJ-45 connector for the sound system controls. Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5” X 6” X 1.25” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 oz. -
The BLU-CS is a volume control designed to work with the BSS London Series of Digital Signal Processors for LDS Chapel installations. It provides controls for turning on and off and setting the volume level of the satellite audio feed in the chapel. The connection on the backside of the satellite audio control is an RJ-45 connector. Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5” X 4” X 2.5” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 oz. -
The BLU-IR is a light source-receiver pair of photoelectric sensors used to turn on speakers in an adjacent room when a sliding door between the rooms is opened. The sensors are mounted on heavy duty aluminum brackets. Both the Emitter and Receiver cables end in pigtail wires. Specifications Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-30 VDC (Polarity protected) Current Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sink up to 100mA Response Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,100uS, Thru-Beam Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . Pulse Modulated LED, Infrared=880nm Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65’ (20m) Hysteresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20% of signal Light Immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . high immunity to ambient light Diagnostic Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red LED=Output Status Green LED= Power “ON” Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . -40 C to 70 C (-40 F to 158 F) Housing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . high-impact polycarbonate Waterproof Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4X, IP66 -
The BLU-SM is a microphone designed to work with the BSS Audio and QSC Digital Signal Processors (DSP) for LDS Chapel installations. It mounts to the front of the sacrament table. A template is provided to assist in the installation process. Also included is the mounting hardware. The microphone is activated by lowering the front panel. When it is lowered, an LED will light to indicate that it is on. Specifications Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1” H X 1.2” D X 9.75” L Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ib. 2 oz. Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ga. steel Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dark brown paint Microphone type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . electret condenser Output connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-pin male XLR Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . same as podium in chapel Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . phantom power from DSP Mounting hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . four screws (provided) -
The BLU-SM is a microphone designed to work with the BSS Audio and QSC Digital Signal Processors (DSP) for LDS Chapel installations. It mounts to the front of the sacrament table. A template is provided to assist in the installation process. Also included is the mounting hardware. The microphone is activated by lowering the front panel. When it is lowered an LED will light to indicate that it is on. -
The BP-1 is a black powder coated steel plate designed to facilitate the mounting of a QSC Touchscreen device on the Bishop’s pedestal. -
The CP1 series of panels are made to be mounted in the sound rack for routing audio and video signals in a building. The CP1-BM panel features a female XLR connection for accessing a balcony mic audio signal at the rack. The CP1-BM module is available in black only, with a white silkscreened legend. -
The CP1 series of panels are made to be mounted in the sound rack for routing audio and video signals in a building. The CP1-C panel features a HDMI thru connection for handling a HD video signal from a camera. The CP1-C module is available in black only, with a white silkscreened legend. -
The CP1 series of panels are made to be mounted in the sound rack for routing audio and video signals in a building. The CP1-CA panel features a female XLR connection for accessing a chapel audio signal at the rack. The CP1-CA module is available in black only, with a white silkscreened legend.
