-
The PMC is a 24-volt DC remote controlled relay which can switch signal or power up to 10 amps. It is designed to control the motor of a pulpit or lectern. Installation is easy. A screw terminal connector is used for the control side, and a 6-pin Molex connector is used on the switching side. The mating Molex connector and installation pins are provided with the PMC. The two heavy duty UL listed Potter & Brumfield relays are both socketed for ease in servicing. -
The SPC5X7 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The SPC5X12 Pulpit Control Mounting Plate provides a filler for a larger pedestal box when mounting a pulpit control panel. It is dark brown, painted aluminum. -
The 170 Blank is a 13.5” X 13.5” blank wall plate used to cover the hole left by a 170 In-Wall Amplifier when it is removed from a building. The wall plate has corner mounting holes, and is covered with an off-white epoxy-based paint. The 170 Blank can also be used as a mounting base for custom electronics. -
The RC10L-5 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for four channels with a master volume control. The RC10L-5 has a 10’ cable terminated into an 8-pin male DIN connector. The mating 8-pin female DIN connector is provided mounted on a single gang stainless steel wall plate. The RC10L-5 can also be plugged into an MSC-R module. -
The RC10L-10 is a remote control designed to work with either Ivie or BSS Audio DSP’s and Auto mixers. It provides volume controls for nine channels with a master volume control. The RC10L-10 has a 10’ cable terminated into a 13-pin male DIN connector. The mating 13-pin female DIN connector is provided mounted on a single gang stainless steel wall plate with a euro-style terminal block on the backside for wiring connections. -
The FR700 is a 6.5” X 3.75” piece of Lexan plastic used to cover the holes left around the edges when installing a new microphone in the Primary Room. The backside has a peel off adhesive surface that holds the cover in place. -
The MJ-1 is a single female microphone jack mounted on a single gang stainless-steel plate. Wire connections on the back of the plate are via a 3-Pin screw down terminal. -
The MJ-2 features two female microphone jacks mounted on a single gang stainless-steel plate. Wire connections on the back of the plate are via a 3-Pin screw down terminals. -
The MF-1 features a F-81 F-Style Barrel connector mounted on a single gang stainless-steel plate. Backside is the same as the front side. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient. -
The VDA-4 is a compact, high-performance video distribution amplifier for use in distributing color or B/W composite video signals. Each amplifier distributes a single video signal to four amplified outputs. Each output is a 1-volt composite video signal. The VDA-4B has standard BNC connectors on its’ inputs and outputs, while the VDA-4F has standard “F” style connectors on its’ inputs and outputs. The VDA-4 outperforms many other video distribution amplifiers in its’ ability to provide a good video picture in low AC voltage situations. The VDA-4 can continue to supply a good picture on each output down to 65VAC. Each VDA-4 comes with a UL/CSA approved wall power supply. The VDA-4 does not require you to sacrifice rack space, it can be mounted where it is most convenient.
